Spa Delivery

Spa or Hot Tub Delivery Checklist

Congratulations on the purchase of your new Spa from Central Jersey Pools!

We understand a purchase such as this can be a big decision and everyone here at Central Jersey Pools is so very grateful you've chosen us to help bring your vision of spa ownership to life.

There are a few things to consider before taking delivery of your spa so we've put together this guide to help you along the way.

Correct preparation, installation and care will provide you and your family with many years of relaxing, stress free enjoyment!

Decisions, decisions, decisions.

• You know what they say...  Location is everything.  Here are a few things to consider.
• Have you picked out the perfect spot for your spa?
• How much space is available for the spa in this location?
• Is there delivery access to the location?
• What are the door openings if the spa is going inside?
• How wide is your fence gate?
• Is the patio on on a 2^nd level (or higher)?
• Will your deck/floor/patio support the weight of the spa?
• Is there a dedicated 50 or 60 amp GFCI breaker or will one need to be installed?
• What is the distance from your location to the breaker?
• Do you have a nearby water source to fill the spa?
• Is there proper ventilation for an indoor spa?
• Is there proper flooring for an indoor spa?
• Do you have the level of privacy you prefer?

Common Questions

1. Will I need a permit? - Most cities and counties require permits for construction of exterior surfaces (decks, spa enclosures, etc.), and electrical installations.  Please check with your town or county on permit requirements.

2. Will I need to install a fence/barrier? - Some communities have residential barrier codes that may require fencing and/or self closing gates to prevent unsupervised access.  Please check with your local building department for requirements.

3. Do I need a plumber? - No plumber is required!

4. Do I need an electrician? - Yes.  You will need to bring in a professional to install a GFCI (ground fault circuit interrupter).  Your main breaker will also need a 50 or 60 amp breaker.

Outside Placement

• When placing your spa outside, make sure to never place it directly on grass, pavers, bare ground or any broken, uneven surface.  Failure to do so will void your warranty should any issue arise from improper placement.
• A 4" thick concrete pad is recommended if you are installing directly on land.  The dimensions of the pad should be able to accommodate the outside dimensions of the spa along with any items you may have around the spa such as stairs.
• Never position your spa under or near overhead power, telephone or cable lines.
• Prepare for service calls by making sure the spa is placed so that there is full access to the spa equipment, normally located beneath the control panel in the front of the spa.  Make sure there is enough room to remove all sides and the rear panel should those spaces need to be accessed.
• If building your spa into your deck or patio, it's best to make it so the spa can be easily lifted or removed if ever needed. (Remember to make sure there is service access to all panels.)
• If you plan on using the spa during the winter months, consider placing it close to a door for quick access.  If you only plan on using it during the summer, consider placing it where it may receive shade or under a gazebo or umbrella.
• Want to stay out of your neighbors view?  Consider placing your spa where you can have some privacy.  Behind trees, fencing, etc.
• Speaking of view..  What do you want to see while you are relaxing?  The neighbors shed or your beautiful landscaping?
• How much debris are you exposing your spa?  Is it surrounded by trees?  Will your gutters splash debris and water onto the spa?
• Your spa must be on a solid, level foundation.  The area must be able to support the weight of your spa, the water it holds and the people using it.  If you use an improper foundation, you may cause stress to the shell.  Any damage caused by improper placement will void your warranty.
• If placing the spa on a deck or patio, the space must be able to support the weight it will bare.    Please consult with a structural engineer or licensed contractor to determine if you have adequate support.
• Placing the spa on an elevated concrete foundation will allow water to drain away and protect your spa equipment from water damage.

Inside Placement

• Code-compliant floors or level basement concrete are adequate to support the weight of a spa.  Screened in rooms, porches, four season rooms should be checked for adequate support.
• Water will accumulate around the spa so be sure to install flooring materials that provide a good grip.
• If installing your spa inside, you will need to have proper ventilation.
• If building a new room for your spa it's a good idea to install a floor drain.
• When your spa is in use and the cover is removed, a great deal of humidity and moisture are put into the air.  This can cause damage to walls, ceilings, carpet, curtains, furniture, etc.
• Make sure there is a exhaust fan or window next to or above the spa.
• Do not place your spa directly on a carpet or wood floor.
• Installing on ceramic tile or water resistant flooring is recommended.
• Make sure to leave enough space around the perimeter of the spa to allow for splashing.

Electrical Requirements

• It is very important that the required electrical service is installed.  All electrical circuits must be installed by a qualified, licensed electrician.  The electrical wiring of your spa must meet the requirements of the NEC (National Electrical Code) as well as any state or local codes.  Failure to do so will terminate your warranty and could result in injury or death.
• All 240 volt spas must be hardwired to the power supply and the power to the spa must be on a dedicated circuit that does not share power with any other appliance or lighting.
• Please refer to your owners manual for specific electrical installation instructions.

Prior to Delivery

• Prior to your delivery, double check the dimensions of your spa and compare them to the route being used to place the spa into position.
• Will any gates or fencing need to be removed?
• Are there any protruding meters, A/C units?
• How is the overhead clearance?  Are there any low hanging eaves, trees or rain gutters?
• Is Fido's dog house in the way?  A shed?  What about that pile of firewood?
• If there needs to be a 90 degree turn made, can it be cleared?  (Spas do not bend!)